Electrorad Digi-Line Single Panel 1250w Electric Radiators maximise energy efficiency with the latest thermal fluid technology, a high-precision electronic thermostat, and the option of fully programmable heating control. Digi-Line radiators feature an oil-filled central cavity which uses 100% efficient electric elements to heat the radiator surface rapidly and uniformly, ensuring even heat distribution throughout your home without hot or cold spots. Central convection fins create the perfect balance of radiated and convected heat, warming you directly as well as warming the air. The precision thermostat is accurate to within a tenth of a degree, switching the radiator on or off automatically to maintain a comfortable temperature. With good insulation, this means the radiators only use power for a fraction of the time.
This updated, 2018 version of the Digi-Line features energy-saving open window detection and adaptive start functions. Open window detection allows the radiator to shut down whenever it senses an opened window, reducing wasted heat. Whereas adaptive start allows the Digi-Line to begin heating in advance of its schedule, ensuring it reaches optimum temperature precisely when it should.
A maximum surface temperature of 60 ˚C, 75 ˚C or 90 ˚C can be set via the radiator's lockable control panel. For more advanced energy saving control, an optional central programmer can be purchased which allows you to set different temperature settings and operating times for each radiator, minimising waste and keeping your heating bills as low as possible.
The Digi-Line Single Panel range is also mess-free, easy to maintain and very durable. The thermal fluid cannot freeze and is specifically designed to prevent internal corrosion. The radiators do not use a circulation pump or any other moving parts, ensuring that the radiator elements do not wear down.
The traditional steel design of our radiators make them timeless additions to any home. They're eco-friendly too: made and designed in Britain with 100% recyclable fluid.
Electrorad radiators do not come supplied with a plug, which means they will need to be hardwired by a professional electrician. For plug-in-and-go installation, a plug must be purchased and fitted to the cable. The radiators can then be mounted to the wall and plugged into the nearest socket. The optional central programmer communicates with in built radio receivers in each radiator, this programmer does not require extra wiring. The programmer can be used freestanding or can be easily mounted on the wall.
|Cable Length (m)||1.5|
|Heat up to||12m²|
All products are stocked in large quantities for a rapid delivery service. Next day service is available if ordered before midday
The Digi-Line electric radiator range has been designed and is manufactured in Britain, to give electricians the same choice of radiator type and selection of sizes as plumbers have always been used to. The radiators are filled with a thermal fluid to transfer heat to the whole of the surface area without the need for any pump or moving parts. The fluid is heated by 100% efficiency electric elements which are controlled by the most advanced thermostat electronics available. The radiator body is constructed in steel and powder coated to ensure a high quality, extremely long lasting and robust finish. The range is available in 500mm & 300mm heights and power ratings from 500 watts to 2000 watts. Digi-line's single panel and double panel, wall mounted electric radiators are available, and both have convection fins to ensure the perfect balance of radiant and convected heat. Only the very best components and materials have been used in the new Digi-Line range.
There are some more very special, unique and energy saving features built in to the new electronics. All features do not have to be used but can be activated if required.
The optional central programmer is battery powered and uses radio frequency signals to communicate with these electric radiators, so no wiring is required. It can be wall mounted or can free stand. All electric radiators can have different temperature settings, and every zone can have different operating times. The central programmer is capable of separately programming up to 4 separate zones. This provides for the ultimate electric heating system with absolute control over temperatures, times and energy usage.
With the Touch E3 it is no longer necessary to go to a radiator to make control changes, any radiator in any room of the property can be controlled individually from this central control. Because it is communicating with each radiator it can utilise the thermostat sensors on each of the radiators to produce exactly the temperature you want in each room separately. This means you also have absolute control of the energy use. All features can also be controlled from the Clevertouch app from anywhere in the world.